Sentence examples for aluminium surface is from inspiring English sources

In this paper the effects of structural and process variables on wear resistance of polyurethane/titanium dioxide coatings on aluminium surface is studied.

The nanostructured aluminium surface is UV cured onto the TFT glass plate with 8.5 μm spacers and then filled with LCM1107. Figure 6a shows a microscope image of the resulting device (× 10) in which the electrical components of the TFT can be clearly seen.

The images showing a large amount of white particles present at the tribosurface which can be attributed to the oxidation of the surface due to frictional heating as the aluminium surface is oxide-prone.

Chemical interaction between silane layer and aluminium surface was examined via FTIR-ATR.

The adsorption of the inhibitor on aluminium surface was in accordance with the Langmuir adsorption isotherm.

But, especially when exposed to outdoor conditions, aluminium must be protected and, therefore, at the present time, anodised and electropolished aluminium surfaces are considered the most suitable solutions.

Low energy ion implantation of nitrogen into oxide free aluminium surfaces was used to obtain stoichiometric and pore-free AlN layers of about 8 10 nm thickness.

The corrosion resistance of the sol gel sealed anodised aluminium surfaces was evaluated using neutral salt spray testing and electrochemical impedance spectroscopy.

Prior to bonding, the aluminium surfaces were pre-treated with chromic acid anodizing and primed with BR 127 (Cytec Engineered Materials, Tempe, Arizona, USA).

Especially in the paintings on aluminium, the surface is exquisite, as richly patterned as nature itself.

The growth of nanoporous alumina at an aluminium surface which is not completely covered by an electrolyte has been investigated.