The phrase "along the outer circumference" is correct and usable in written English.
It can be used when describing a location or movement that follows the edge of a circular or rounded object.
Example: "The path runs along the outer circumference of the park, providing a scenic view of the gardens."
Alternatives: "around the outer edge" or "along the perimeter."
Open image in new window Fig. 7 Maximum temperature displacement along the outer circumference.
Open image in new window Fig. 5 Temperature profile along the outer circumference of a stationary cylinder.
In Fig. 5 the temperature profile along the outer circumference of a stationary PVC pipe in a oven like that shown in Fig. 1 has been compared at different times with that due to uniform radiation.
c Small-size pipe: (D_e=125) mm (mathrm{th}=7.4) mm Open image in new window Fig. 11 Effect of the lamps' angular positions on heat flux distribution along the outer circumference of pipes.
(D_e=250) mm, (mathrm{th}=10.8) mm, (omega =1.87,mathrm{rad,s}^{-1}). Figure 7 depicts the maximum temperature displacement along the outer circumference, (Delta T_{r_mathrm{e}}): as expected, this quantity decreases with increasing angular velocity.
After an expression for the calculation of local view factors along the outer circumference of the cylinder was obtained, a finite element model accounting for cylinder rotation via a time-dependent boundary condition applied to a stationary domain was set-up in COMSOL��.
The shaft was free to move too much side to side (perhaps a couple of hundredths of an inch), causing the outer circumference of the rotor to bind on the inner circumference of the motor housing when a current was applied.
The diffraction lattice pattern around the outer circumference of the hole corresponds to InGaN/GaN (inset of Figure 11b), with significant differences[56].
Extending the procedure described before to each arc, the view factor distribution on the outer circumference of a cylinder for a given layout of the lamps was calculated.
To control grid refinement, the number of elements on the outer circumference of the cylinder, (N_mathrm{El~OC}), has been chosen as tunable parameter.
