Sentence examples for almost complete dissolution from inspiring English sources

In vitro release studies of SAT-NC showed almost complete dissolution within 20 min in water.

With increasing treatment time or concentration of H2PtCl6 solution, increasing numbers of noble metal nanoparticles on the surface of the carbon shells, and almost complete dissolution of the metal core, were observed.

Our patient developed a localised infection with a significant concomitant osteolysis and an almost complete dissolution of part of the ulnar diaphysis.

After 10 s dipping (blue curve), as expected, the interference fringes are no more visible due to the almost complete dissolution of the porous layer.

· When cysts turn grey (with powder bleach) or orange (with liquid bleach), or when microscopic examination shows almost complete dissolution of the cyst shell (= after 3-15 min)., cysts should be removed from the decapsulation suspension and rinsed with water on a 125 µm screen until no chlorine smell is detected anymore.

In this case, however, the erosion front was closer to the diffusion front, affording a thinner dissolved drug gel layer and almost complete matrix dissolution in 8 hours.

To obtain a homogeneous polymer solution, the speed of the stirrer was reduced to medium and it was stirred for almost 90 min to ensure complete dissolution.

Once the amount of AgNO3 was sufficiently enough (CA-2), there was also almost no existence of Cu due to the complete dissolution of Cu into Cu2+ according to Eq. 10.

The dissolution rates of the basalt components scale exponentially with temperature, and the glass is almost completely dissolved after 10000 years at 60 C, whereas the time for a complete dissolution takes 4000 and 1500 years at 80 and 100 C respectively (Figure 3a, d, g).

Having lactose distributed homogeneously in the matrix resulted in significantly faster and almost complete release due to enhanced swelling of the polymeric matrix with the dissolution of lactose.

The electrochemical dissolution (at 400 mV versus SCE) of inclusions occurred uniformly along the interface and this process was almost complete after 25 min immersion.