Your English writing platform
Discover LudwigSuggestions(1)
Exact(3)
If the deformation goes beyond the allowable value, the highway would be threatened by collapse.
When the deviation exceeds the maximum allowable value, the amount of radiation obtained on the receiver decreases rapidly.
Similarly, the maximum-strain criterion means that when the strain exceeds the given allowable value, the constitutive materials fail.
Similar(57)
When the overall wind power of the network exceeds the allowable value for the whole network, the ESSs are controlled to absorb the surplus wind power.
We focus on the influence of the elasticity of the trunk joints on the possibility of the transition and the allowable value of the transition velocity.
If the answer to the number of vomiting episodes was 99 (the maximum allowable value on the eDiary spinner), then the data were considered missing.
When the residual maximum flexural crack width is set at 0.4 mm, the allowable value of the maximum flexural crack width at the peak deformation angle is 0.8 mm.
Stress analysis results show that the maximum stress intensity was below the allowable value, and the cryostat had buckling safety factor of over 16.
The results show that the compressor blisk has a reliability degree of 0.9984 when the allowable value of the compressor blisk radial deformation is 1.60×10−3 m.
Three main ideas were the pillars of the development activities: the reduction of the geometrical filament size down to 2 μm, the use of CuMn resistive barriers to reduce the inter filament coupling currents, and the reduction to the minimum allowable value of the twist pitch.
It can be seen that the system pressure is controlled and limited to the maximum allowable value of the accumulator inlet absolute pressure (i.e. 21 MPa as listed in Table 1).
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com