The phrase "allowable space" is correct and usable in written English.
It can be used in contexts where you are discussing limits or permissions regarding physical or abstract space, such as in design, architecture, or regulations.
Example: "The allowable space for the new office layout must accommodate at least ten workstations without compromising safety regulations."
Alternatives: "permissible area" or "acceptable space".
The iteration process focuses on the optimization of allowable space between plasma scrapped-off-layer and VV in order to generate a MFC/VV/BB/plasma sustainable configuration with minimum global system volumes.
MEP runs are typically associated with having sufficient access and coordination between the trades to fit the pipes in the allowable space provided.
The National Capital Planning Commission (NCPC) has studied various scenarios, including increasing the maximum height to 200 feet, which could add up to 50% to the allowable space over time.
Glendale restricts smoking to 25% of outdoor dining areas, but the council is considering doubling the allowable space since business owners — mostly those who provide hookah products — have complained that the current rules take a heavy toll on their bottom lines.
This nonlinear relationship suggests "envelopes" of allowable space demonstrating that large temperature and/or pH differences drive concomitantly large evolutionary divergences and that communities inhabiting similar temperature and pH ranges are not necessarily evolutionarily related.
Open image in new window Fig. 13 Maximum allowable spacing of flexural reinforcement.
Figure 16 shows a flowchart for calculating the maximum allowable spacing of the flexural reinforcement (smax) for the crack control design of the PSC members proposed in this study.
In particular, the allowable spacing of the tension reinforcements in the PSC members reinforced with 550 MPa nonprestressed reinforcements is always smaller than those reinforced with 420 MPa nonprestressed reinforcements.
The current ACI318-14 building code allows to use 2/3 f y for both 420 and 550 MPa reinforcing bars as the steel stress at the service loads when the maximum allowable spacing (smax) of the flexural reinforcements is checked for the proper crack control.
Except some cases of the partial PSC members reinforced with 420 MPa nonprestressed steel having the concrete cover depth over 60 mm or the full PSC members having the concrete cover depth over 120 mm, the allowable spacing of the tension reinforcements were always smaller in the PSC members than in the RC members.
This function gives the probability that the system is in state s at time t, where s can take on any value in the allowable state space.
