The phrase "allowable power" is correct and usable in written English.
It can be used in contexts related to regulations, limits, or permissions regarding power usage or capacity, often in technical or legal discussions.
Example: "The allowable power for this device is set at 100 watts to ensure safety and efficiency."
Alternatives: "permissible power" or "acceptable power level."
The maximum allowable power that can be produced with the LSPBR is hereby determined.
The overload occurrences have also been found to correspond especially with the overcurrent and distance protection, often causing their overfunction under allowable power system operating conditions.
In this analysis, finding the best core pattern, which attains maximum multiplication factor, keff, by considering maximum allowable power picking factors (PPF) is the main objective.
In dark silicon many-core systems, system-level techniques have been developed to selectively activate nonadjacent cores in physical locations to maintain the allowable power budget and eliminate thermal hotspot.
This paper discusses the development of a new algorithm with smaller time complexity for automation of the design of clock distribution network that can greatly reduce the time and effort required, at the same time meeting the conditions set for delays and maximum allowable power dissipation.
It is demonstrated that when IP traffic load is light in such systems, the effect of either four-wave mixing (FWM) or stimulated Raman scattering (SRS) is much less serious than the worst-case assumption, and the limitation on allowable power of input light is also relaxed.
Where P L0, P G0 are respectively the maximum allowable consumption power and reverse power on the connect line.
In order to satisfy the constraint target probability, we proposed a two-step approach to setting the maximum allowable transmit power where a transmission decision margin and a transmit power margin are utilized.
When a maximum allowable transmission power for SUs (P_{tx}^{max}) is given, the maximum transmission power has (left( {K_{1} + 1} right)) feasible power intervals as follows: P_{n} = frac{n}{{K_{1} }}left( {P_{tx}^{max} } right), quad n in left{ {0,1, ldots,K_{1} } right} (6 where (K_{1} > 0) is an integer.
Based on the derived expression, the maximum allowable transmission power for CR data transmissions is computed such that an enforced power mask constrain over the PR channels is not violated.
Q_{TUi}^ = frac{{u_{TUi} hat{Q}_{TUi}^{{sumlimits_{i = 1}^{L} {left( {u_{TUi} hat{Q}_{TUi}^ right)} }}Q_{all {text -} BESS}^ (14 where ( hat{Q}_{TUi}^ ) is calculated based on the maximum allowable apparent power of PCS i. ( bar{S}_{i}^ ) and the current active power of each PCS, ( P_{i}^ ), are as shown in (15).
