Sentence examples for allowable bending from inspiring English sources

The dimensionless objective function is so defined as to comprise both a cross section area and a maximal allowable bending moment.

The objective of this chapter is to determine the AGMA bending stress for a spur gear, to determine the AGMA contact stress, to determine the allowable bending and contact stresses, to determine a factor of safety, and to propose a design strategy for spur gears.

BE plate : allowable bending stress of designed plate.

Allowable bending tensile strength of bracing bars (N/mm2).

The yield stress of bracing bars was observed to be 450 N/mm2, and allowable bending tensile strength was taken as 0.66 times yield stress.

M: bending Moment, f1: Transversal Bending Stress, f2: Longitudinal Bending Stress, fb: Allowable Bending Stress, a1: Transversal Direction a, a2: Longitudinal Direction a, t: Thickness of member.

The minimum allowable bend radii of RTPs with different ply angles are determined.

Because the allowable compressive bending stress is 42 MPa, the maximum compressive stresses of the girders are far less than the allowable stress, indicating the excellent load resisting capacity of the curved bridge.

From the analysis displacements, nodal moments, allowable stress, bending stress is found at all nodes.

Strength characteristics of the wood have considerably decreased, but the allowable stress for bending, tension parallel to grain, and shear were still higher than NDS2005 requirements.

Therefore, the allowable stress for bending, σ Flim, is expressed by {sigma}_{Flim}=2times {sigma}_w (5).