Sentence examples for all samples were attributed from inspiring English sources
The peaks observed in the range 1380 1320 cm−1 (9 and 10) in all samples were attributed to the bending vibration of C H and C O groups of the aromatic ring in polysaccharides [ 32].
The typical Si O Si bands at 462, 810 and 1,075/cm present in all samples are attributed to the condensed silica network [32].
The very broad peak at 2θ of around 23° in XRD patterns of all samples was attributed to the characteristic diffraction peak of the amorphous SiO2 matrix.
A broad absorption band centered at ≈3,470 cm−1 present in all samples is attributed to O H stretching vibration of hydrogen-bonded hydroxyl groups in the brucite-like sheets and of water in the interlayer space [13, 14].
Only 12 positive samples were attributed to natural causes of death.
Sensory evaluation was performed during storage and samples were attributed into three quality classes namely fresh, semi-fresh, and spoiled.
The higher peak shear strength and lower hydraulic conductivity of the waste samples were attributed to this effect.
Thinner nitrided layers on ground and sandblasted samples were attributed to high compressive residual stress states and a stress-affected diffusion of nitrogen and carbon.
The longer lives of the coated samples were attributed to the higher fatigue strength of AA7075 relative to AZ31B and coating's high adhesion strength.
The electrochemical performance enhancements for the VO43− substituted samples were attributed to the reduction of charge transfer resistance, increase of electrical conductivity, and fast lithium ion diffusion behavior.
The most commonly observed failures on the Cr6 + treated samples were attributed to microstructural features of the substrate that were not adequately healed by the Cr6 + passivation treatment.
