The phrase "alkali environment" is correct and usable in written English.
It can be used in contexts related to chemistry, environmental science, or any discussion involving alkaline conditions or substances.
Example: "The experiment was conducted in an alkali environment to observe the effects on the chemical reaction."
Alternatives: "alkaline conditions" or "basic environment".
FRP composites are so resistant against the corrosion, salty, and alkali environment.
Experimental results showed that DS-P can provide sufficient alkali environment for activating the pozzolanic reactions of GGBFS.
The hypothesis behind the possible increased protective effect of NaHCO3 is as follows: the use of NaHCO3 leads to alkalisation of renal tubular fluid; in a more alkali environment, ROS formation is impaired [3, 40].
Hence, to attain the desired design strength, the fly ash is activated in an alkali environment to form a geopolymer by triggering the unreacted polymeric compounds present in the fly ash.
La0.76Sr0.24MnO3 + δ particles, prepared by performing a traditional, solid-state method of synthesis, were coated by uniform layers of silica via initiating hydrolysis and condensation of TEOS in aqueous alcoholic alkali environment.
Experimental results demonstrate that natural oyster shells could not provide an alkali environment with sufficient metal powders for oyster-shell powder to foam, thus creating a need for additional alkali agent or calcined oyster shells.
Graphene is also susceptible to acid and alkali environments and resists corrosion from the surroundings.
In order to increase the durability in alkali environments (i.e.: concrete), a PMMA coating was also applied on the BFRP rods and its effect was assessed too.
The alkali environments provides the better condition to achieve maximum specific surface area and the thermal treatment at 800 °C causes transformation of amorphous phase into crystallite phase.
Results show that alkali environments could seriously affect the durability of BF ropes and BFRP rods, thus a suitable coating should be provided to protect them before their use on such environments.
356 results of tensile tests of GFRP bars subjected to hot dry and humid air, different alkali environments, salt solutions with various concentrations, and plain and distillated water were collected from the literature.
