The phrase "alignment of the sensor" is correct and usable in written English.
It can be used in contexts related to technology, engineering, or scientific discussions where the positioning or calibration of a sensor is being described.
Example: "The alignment of the sensor is crucial for accurate data collection in the experiment."
Alternatives: "sensor calibration" or "sensor positioning".
Extended Data Fig. 1 Sequence alignment of the voltage sensor of NavAb with those of human Nav1.4 homologous domain (D II, Nav1.4 DIV, Cav1.1 DII and Cav1.1 DIV.
This is related to a non-straight alignment of the ultrasound sensors used in the laboratory system.
An angular orientation involving the alignment of the furthest error sensor with the first diffracting edge of the barrier and the primary source was observed to perform well for a variety of frequencies, since the spacing between error sensors and between control sources is of the order of a quarter-wavelength.
Successful track reconstruction in a silicon tracking device depends on the quality of the alignment, on the knowledge of the sensor resolution, and on the knowledge of the amount of material traversed by the particles.
The proposed sensing framework does not require frequency alignment between the filter bank of the sensor and the primary signal.
Both are opposite to the complex alignment of the sample under a small SQUID sensor and have a sensitivity limited by the mechanism of the cooing Dewar and the shielding can for a general SQUID system.
During the tests we evaluated the needed access size as well as its effects on the sensor films and the alignment of the patella.
When a GMR structure encounters the magnetic field of a bit of information on a rotating hard-drive, the polarity of the sensor layer aligns with that of the nearby fixed-spin layer in a parallel or anti-parallel (ie, in line but pointing the opposite way) fashion.This alignment enhances the change in resistance to an electric current passing through the sensor.
The consistency of the coating thickness depends on the stress distribution on the ITOF sensor, and the vertical alignment of the fiber during the coating process.
We therefore computed, for each sensor, the degree of phase alignment of the given phases.
