The phrase "airflow range" is correct and usable in written English.
It can be used when discussing the limits or extent of airflow in a specific context, such as in engineering, HVAC systems, or aerodynamics.
Example: "The device operates efficiently within an airflow range of 50 to 200 cubic feet per minute."
Alternatives: "airflow limits" or "airflow parameters".
Using a direct and indirect CO sampling method, we were able to detect CO concentration differences across the full airflow range tested (1.0-12.0 L/min).
In addition to assessing total deposited mass across the dilution airflow range, a four QCM approach enabled the assessment of particulate deposition across the linear exposure module at all airflows tested (0.5 4.0 L/min).
Airflows were selected based on maximising deposited particle mass and nicotine concentration in a short duration (10 puffs for at source measurements, 5 puffs per product for chamber deposition measurements); furthermore, the airflow range is consistent with other Vitrocell module studies [25].
At the standard (supplier recommended) vacuum flow rate of 5 ml/min/well, mean particle deposition (mean of all 4 well positions repeated 5 times) was in the range 8.65 ± 1.51 μg/cm2-0.72 μg/cm2-0.72m2 in the airflow range 0.5-4.0 L/min.
To measure deposited mass prior to biological exposure we used four QCMs installed into a 6/4 CF Stainless Steel Vitrocell® module and demonstrated that deposition was closely correlated with airflow (R2 = 0.975) with a deposited mass range of 5.9 0.36 μg/cm2 at a diluting airflow range of 0.5-4.0 0.5-4.0
Median time (minutes) to recovery was 5.5 for 'no airflow' (range 3 10; IQR 3.5 6.5) and 4.5 for 'airflow' (range 1 6; IQR 3 6).
Each lab has customized goal based on number of hoods, usage patterns, and exhaust airflow ranges.
The airflow ranges tested produced minimal to complete cell death.
In the regulated condition, DO was maintained at 50% saturation by a PID controller (the airflow rate ranged between 0 and 3.5 L/min, and stirring speed ranged between 200 and 1,000 rpm).
A multi-vari chart with individual values showing deposited particle mass for the 4 QCM positions (1 4, left-right) at diluting airflows ranging 0.5-4.0 0.5-4.0nd sampL/minfrom the dilution system and5 ml/min/well vacuum through the module (n = 5/QCM posamplingirfrom).
Excessive airflow in range hoods can quickly depressurize airtight, energy-efficient homes, Singer says.
