Sentence examples for air sintering from inspiring English sources

Coatings applied by two approaches, alcohol and sol-based slurries, were examined and optimized in terms of their recipes and air sintering temperatures.

We could achieve effective sintering within 8 min which is very less compared to conventional hot air oven sintering.

It was then washed with deionized water and ethanol, dried with air, and sintered again at 450°C for 30 min.

The sintering of ZrO2-3 mol% Y2O3-NiO composites was performed in argon atmosphere because the total sample destruction took place in case of sintering in air.

Novel Ceramic-Fiber-Reinforced-Metal-Intermetallic-Laminate (CFR-MIL) composites, Ti Al3Ti Al2O3 Al, were synthesized by reactive foil sintering in air.

In our previous study [18], it was found that the phase transformation from tetragonal to monoclinic phase in 3Y-TZP-NiO composite occurs only during sintering in air environment, and during sintering in argon environment, there are no traces of monoclinic phase, but the fracture toughness value increased by 40 50% [19].

In this work, Ni nanopowder mixed with commercial Ag-paste was prepared and screen-printed on the glass substrate, and then subjected to sintering in air at 500 °C.

Fully dense electrolytes with thickness ranging from 9 μm to 26 μm are obtained after sintering in air at 1350 °C.

The resulting mixtures were shaped into green cylindrical samples by powder pressing (350 MPa) followed by sintering in air (1000 1300 °C for 4 h).

The scattering layer of 200-nm-sized TiO2 paste is coated on the top of the first TiO2 layer, followed by sintering in air at 500 °C for 30 min.

Studies of the real structure and surface property evolution at sintering under air up to 1100 °C revealed some redistribution of elements between the phases without new phase formation.