Sentence examples for air injection angle from inspiring English sources

Therefore, a careful design should keep in mind important variables such as the effects of receiver edge and lateral wind, as well as air injection angle.

The model is conducted to determine the effects of liquid flow rate, air injection rate, annulus inclination angle, elevated temperature and pressure on the cuttings transport efficiency.

However, according to our calculation, under an identical injection angle, SPR excited from air-Au interface occurs at a much shorter wavelength that is beyond the scope of our spectrometer; thus, the dips observed in Figure 2b are mainly from the Au-water interface.

Furthermore, the optimal design and operating parameters are obtained by analyzing the injection angle and velocity of the secondary air.

Magnets along the beam line are used to control the injection angle and focal point of the electrons.

After air injection, the loss coefficient along spanwise reduces significantly and the flow turning angle increases.

Three influencing parameters are considered: secondary injection diameter, secondary injection angle and secondary injection numbers.

Resistance tests were conducted with two forms; first of which was conventional prismatic planing hull form with a deadrise angle of 10°, and second one was an alternative form with an artificially cavity which was tested both without any air injection, and with two different air injection rates.

Compressed air (air injection) is sometimes used in place of a plunger.

Injection angle was seen to affect particle distribution and injection pressures.

Two major factors, namely hydrogen injection timing (HIT) and hydrogen injection angle (HIA), were considered.