The phrase "aging procedure" is correct and usable in written English.
It can be used in contexts related to processes or methods that involve aging, such as in food production, pharmaceuticals, or materials science.
Example: "The aging procedure for the wine involves storing it in oak barrels for several years to enhance its flavor."
Alternatives: "maturation process" or "aging process".
Comprehensive microscopic and spectrometric measurements demonstrated a capping agent-dependent with the aging procedure.
Kinetic and thermodynamic parameters of the reaction were obtained for fresh polished nickel electrode (Nif), and for nickel after a quick chronoamperometric aging procedure (Nipc).
The analysis of variance in DSR and ATR measurements revealed that severity of aging procedure affected PMA viscosity greater than polymer composition and concentration did.
Three temperatures (30 °C, 50 °C and 70 °C) were carried out during UV aging procedure with other UV aging conditions kept the same.
Methods of designing the required height of preloads range from simple rule-of-thumb procedures such as factoring up the design loading based on engineering judgment, to graphical methods using the "artificial aging" procedure described by Bjerrum (1972).
Rejuvenator, waste cooking and cotton seed oils contain a great amount of unsaturated fatty acids, similar to the light oil component of asphalt binder which usually decreased due to a long term aging procedure.
The test results indicated that UV and PAV aging procedures are significantly affected by asphalt binder source and grade.
The objective of this study is to investigate the rheological behaviors of various WMA binders after long term UV aging and conventional PAV aging procedures.
Conclusions: The sheep incisor is a poor experimental model of the human tooth, and both aging procedures demonstrate extensive leakage of retrofilling materials after long-term storage.
The results indicated that the combined binders after a short term aging and a long term aging procedures still satisfied the requirement of asphalt binder set by Superpave binder specifications.
The design mixtures were then subjected to 5 different accelerated aging procedures in order to study the influence of some factors (temperature, pressure and humidity) on the durability of the cement-treated materials.
