Sentence examples for aging of the coating from inspiring English sources

Aging of the coating at 800 °C leads to gradual dissolution of the interdendritic eutectic Mo2Ni3Si and subsequent formation of a dual-phase structure with equiaxed Mo2Ni3Si primary grains distributed in the NiSi single-phase matrix.

Raman spectroscopic measurements indicate that the coating is based on an octamolybdate structure and FT-IR experiments show that uranyl hydroxide is present in the as-made coating but no longer apparent in the aged coatings, supporting the proposed mechanism describing the aging of the coating.

As a further analysis, the effect of aging of catalytic coating on the overall combustor performances has been investigated.

This study aims at evaluating the impact of cerium salts (cerium chloride and cerium ammonium nitrate) on the film formation and the ageing of the coating properties during immersion in aggressive solution or humidity fluctuations in atmospheric conditions.

The rapidly solidified microstructural and compositional features, the precipitation and transformation of carbides during aging of Fe-based alloy coating prepared by plasma cladding have been investigated.

Concrete specimens with three types of organic film coatings, namely, polyurethane (PO), epoxy resin (EP), and chlorinated rubber (CR), were fabricated to study the time-dependent relationship between the aging of organic film coating and the corresponding degradation of concrete carbonation resistance.

Lagerfeld made the chartreuse design, aged 21, for the coat category of the International Woolmark prize.

In particular the effectiveness of the coating to weathering and accelerated ageing was checked.

Experimental results show that the adhesion of copper coating is not sensitive to the ageing of the thermoplastic bond coat.

The qualities of the coating surface are strongly dependent on the types of the coating materials.

The pH of the coating buffer significantly affected the coating efficiency.