Sentence examples for aggregate data rate from inspiring English sources

In this work, soliton profiled OTDM packets transmitted at a maximum aggregate data rate of 20 Gbit/s are used as test signals.

Besides, the transmission rate of 356.3, 312.5, 323.8, and 343.1 Mbit/s was achieved for the four channels, respectively, while the BERs were below the FEC threshold, leading to an aggregate data rate of over 1.3 Gbit/s.

Thus, an aggregate data rate of over 1.3 Gbit/s is realized with the 3-dB bandwidth of 20 MHz, while the bit error rates (BERs) for the four channels are below the forward error correction (FEC) threshold.

The experiment verifies that the interchannel interference is effectively alleviated due to the high spatial diversity provided by the fisheye-lens-based receiver, and an aggregate data rate of 1.3 Gbit/s is achieved with the limited 3-dB bandwidth of 20 MHz.

In more detail, assuming the worst case for the signaling overhead, in which 200 users subscribed to N p packages, all watching the same channel with a data rate equal to 500 kbit/s (e.g., low-quality video), the ratio between the maximum overhead (if TCP is used) and aggregate data rate is given by the ratio 40/500 = 0.08, without any compression.

If the aggregate capacity of the available wireless links is smaller than the sum of the total load that needs to be sent from train to wayside (or vice versa), the Shaper will shape the different traffic flows by adapting their aggregate data rate to match the available capacity, based upon the link occupation that is signaled (per service class) by the Scheduler (see Section 4.2.4).

This causes a high spectrum demand of approximately 100 MHz to support high aggregate data rates of up to 1 Gbit/s, which will only be available at frequencies higher than 2 GHz.

The figure shows the resulting aggregated data rates for the 2-GHz carrier and split B when 1, 2, 4, and 8 cells are aggregated.

With respect to the aggregate data, the mean utilisation rate increased from 38 consultations/month/1000 population in 2008 to 69 consultations/month/1000 population after 12 months of the policy.

The total data rate aggregated from all RATs is then the summation of the total data rate from each individual: {R}_{mathrm{b} left[mathrm{Mbps}right]}^{mathrm{CRRM}}={displaystyle sum_{i=1}^{N_{mathrm{RA}mathrm{T}}}}{R}_{{mathrm{b}}_{mathrm{tot}}left[mathrm{Mbps}right]}^{mathrm{RA}{mathrm{T}}_{mathrm{i}}} (7).

This definition was originally validated by the authors through a comparison of aggregate data showing hospital incidence rates and patient characteristics of the cohorts captured through the ICD-9-CM algorithm versus a previous cohort captured through a prospective study of patients with sepsis by Sands et al. [ 11].