Sentence examples for aggregate absorption from inspiring English sources
The coarse aggregate absorption method provided reasonable means to estimate mixing temperature for HMABs.
Therefore, aggregate absorption can be accounted for during the mix design stage by adjusting the mixing water that will be absorbed by the recycled aggregate.
A decreased aggregate absorption rate and an increased specific gravity were revealed as increased mortar compression strength compared to before the modification as the compressive strengths (28 days ages): NFA (22.7 MPa), modified RFA (18.1 MPa), and RFA (16.2 MPa).
External quantum efficiency measurements show that optimization of short circuit current density requires balancing photocurrent contributions from the m-Pc absorption and the fullerene aggregate absorption, which is accomplished by control of the donor-to-acceptor mixing ratio.
The current standardized quality grades of RAs are divided according to aggregate absorption rate and specific gravity, and they are classified into structural concrete aggregates, non-structural concrete aggregates, roadbed materials, and so on, based on these grades as shown in Table 2 (Shi et al. 2015; Behera et al. 2014).
Analysis of test results showed that the aggregate type as well as aggregate absorption rates have significant influence on the electrical charges passed through concrete, especially in early ages of concrete containing aggregates with sedimentary rock origin and relatively high absorption.
Firstly, the imaging method is used to measure the distribution of soot aggregates absorption coefficients in flames.
It is assumed that during the production of LWAC the lightweight aggregate (LWA) absorption is equivalent to a certain percentage of the absorption determined in an aqueous medium.
Table 2 lists the fine aggregate samples' absorption rates.
Moreover, determination of aggregate asphalt absorption is required to correctly estimate air voids and optimal binder content.
Open image in new window Fig. 4 Normalized splitting tensile strength versus aggregate water absorption for RCA concrete (adapted from Yang et al. 2008).
