The phrase "after curing for" is correct and usable in written English.
It can be used in contexts related to processes that involve curing, such as in cooking, construction, or materials science.
Example: "The material should be left undisturbed after curing for 24 hours to ensure optimal strength."
Alternatives: "following the curing period of" or "after the curing time of".
After curing for two days in a snowdrift of salt (in the refrigerator, not the bathroom), they needed a good rinse and a vinegary, escabechelike marinade before he could turn them into a sardine, potato and egg salad, a dish he sometimes features as an appetizer.
Compressive strength analyzes of the specimens were done after curing for 28 days.
After curing for 7, 28, 90 and 180 days the specimens were tested in compression and abrasion.
After curing for 1.5 h under heat (75 °C), the specimens were cut along their mesial-distal orientation.
Compressive strengths of the SCM specimens were higher than those of the control group after curing for 7 days or longer.
After curing for 28 days, nine masonry panels were tested, compression stress being kept constant at a fixed value and shear stress being increased until failure.
The remaining specimens were subjected to three types of exposure conditions—(1) temperature cycles (2) wet dry cycles and (3) outdoor environment as shown in Figs. 2, 3 and 4, respectively after curing of FRP for 7 days.
After curing of beam specimens for 28 days, to accelerate the corrosion process in beam specimens impressed current technique is used.
After curing of the glue for 50 min, the preparation was transferred from the mounting area to a small temperature controlled well (15 °C; volume 79 µl), containing relaxing solution, from which the myocyte could be transferred to a similar temperature controlled well containing activating solution.
All other blends are uncrystallizable after curing except for the 9010 and 8020 nylon/DGEBA blends.
The 10% weight loss and glass transition temperatures of the cured copolymers were 436 °C in nitrogen and 235 °C, respectively after curing at 70 °C for 1 h and 300 °C for 1 h.
