Sentence examples for aforementioned speed from inspiring English sources

There may be pricier versions of the Continental GT, but perhaps none – including the aforementioned Speed –sounds quite so delicious.

Then, a specific amount of zeolite (7.6 g) was added to this solution and stirred under the aforementioned speed for about 1 h and left for 24 h at room temperature.

However, it was not upgraded to a tropical storm since the aforementioned wind speed did not represent the intensity of the depression.

Conversely, hypersonic wind-tunnel experiments purposely neglect the influence of non-rigid structure on the aforementioned high-speed flow effects in an effort to better understand the nature of the high-speed effects.

Subsequently, the FTO electrode with tap pasted on the whole back and the upper front was fixed on the dip coater, immersed into the aforementioned dispersion with speed of 6000 μm/s, and lifted with speeds of 1000, 2000, and 3000 μm/s, respectively.

This chapter discusses the aforementioned types of speeds alongwith various examples.

The coherent reflection coefficients corresponding to the aforementioned density and sound speed profiles for various frequencies, roughness parameters, basement stiffness, are numerically generated and analyzed.

To investigate the robustness of the LBG-based CSI quantization against the aforementioned scenario of user speed mismatch, Figure 8 shows the sum-rate performance of the BD-based MU transmissions as the actual user speed values are uniformly distributed in the range [v - δ, v + δ] where v is the target speed of the used LBG codebook and δ refers to the speed mismatch level.

Incorporating the aforementioned techniques, laminar flame speeds were measured and reported with properly quantified uncertainties for flames of synthesis gas for pressures ranging from 3 to 30 atm, and unburned mixture temperatures ranging from 298 to 550 K.

More specifically, we aim to compare mean square error performance and the convergence speed of the aforementioned estimators.

To speed up the aforementioned solution, we suggest determining the initial subset sizes by sufficient coverage depths.