Sentence examples for aforementioned forces from inspiring English sources

Three such examples surfaced in recent weeks, all of them admittedly too new to have yielded higher test scores or lower dropout rates and none of them alone capable of overpowering all the aforementioned forces of resistance.

The use of optical forces for cell manipulation and sorting, on the other hand, has not been investigated to the same extent as aforementioned forces and methods due to the complicated, expensive and bulky setup required for carrying out such studies.

When the tunnel diameter was changed from 10too 9 mm, the pull-out force has increased to about 12%%, which is probably due to the aforementioned frictional forces, however, by reducing the tunnel diameter to 8 and 7 mm, the pull-out force reduced to 16 and 50 % for 8 and 7 mm tunnel diameter, respectively.

When the tunnel diameter was changed from 10too 9 mm, the pull-out force has increased to about 12%%, which is probably due to the aforementioned frictional forces, but by mostly reducing the tunnel diameter to 8 and 7 mm, the pull-out force reduced to 16 and 50 % for 8 and 7 mm tunnel diameter, respectively.

However, non-contact manipulation cannot perform physical operation tasks, and complex systems are required for generating the aforementioned field forces.

However, Iranians also are aware that the aforementioned business forces in the United States favor the accords as does the Obama administration.

Then input the changed cutting depth and other milling parameters into the aforementioned milling force model to predict the milling force again, and then enter the milling force to the finite element deformation model to obtain the new deformation and machining errors.

Using the aforementioned milling force model and iterative methods, the milling force of each sampling point before iteration and after the iteration and the actual cutting depth U n after the iterative convergence are obtained as shown in Table 2, where n = 1,2,3, …, 17 is the number of sampling points.

A worrying slump in form for the aforementioned Bobby Mimms forced Venables to make a move in the market.

However, this difference decreases and the frequency rises slightly, precisely indicating the moment in which the aforementioned lateral force component starts to influence the stiffness of the bending piece.

To this end, the aeroacoustic model is introduced into an optimization scheme, where minimal sound amplitude is sought in the lift direction, subjected to the aforementioned lift force constraint with a 33% assigned tolerance value.