Sentence examples for affected beam from inspiring English sources
The new method defines the DIF as a function of max(Mu/Mp), where the maximum operator is applied to all beams within the affected bays immediately adjacent to and above the removed column, and Mu and Mp are the factored moment demand under original unamplified static gravity loads and the factored plastic moment capacity, respectively, of an affected beam.
As a result, only a single force displacement response curve is needed in the energy-based pulldown analysis, compared to a large number of force displacement curves for multiple nodes along all directly affected beams above the removed column, as required in the energy-based pushdown analysis.
The simulations also show small-droplet ejection that may adversely affect beam propagation characteristics.
These parameters are considered as the principal components in this work since they moreover directly affect beam stability and link quality.
The results indicate that both the nonlinearity of the subgrade soil and the geometric nonlinearity of the beam significantly affect the beam's response, especially when the beam undergoes a large deflection.
In fact, the concrete beam was coated with fiberglass and ceramic-covered walls in five different directions, and the furnace heat affected the beam in one direction.
Although there are many parameters that affect the beam steering process in beam stabilization, x and y displacement errors contribute the greatest effect on the success of its operation.
However, the atomic structures of defects, interfaces, and surfaces are all preferentially affected by beam-induced object alterations because the binding energies of relevant atoms are significantly lowered compared to those of bulk lattice sites in crystalline solids.
It is found that the primary factors affecting deep beam structure stability are deep beam thickness, cable pre-tension and cable spacing.
In actual engineering, space reflectors including cable mesh antennas are easily susceptible to surface distortion under thermal load and other impacts, which enlarge the beam squint angle and seriously affect the beam pointing accuracy.
The wake fields due to the resistivity and roughness of the beam pipe through the undulator, also affects the beam 6-dimensional phase space volume, and thus the gain and the line width.
