The phrase "adsorption of moisture" is correct and usable in written English.
It can be used in scientific or technical contexts, particularly in discussions about materials, chemistry, or environmental science.
Example: "The adsorption of moisture on the surface of the material can significantly affect its properties and performance."
Alternatives: "absorption of moisture" or "capture of moisture".
Experimental data for adsorption of moisture from an air stream are presented and discussed in relation to the theory.
SiO2 has the highest adsorption capacity and therefore most prone to the adsorption of moisture and similar contaminants.
The VOPcPhO TiO2 (90 nm) nano-composite film is comprised of uniformly distributed voids which makes the surface more favorable for adsorption of moisture content from environment.
(2) The preferential adsorption of moisture results in the decreased gas content.
The presence of -OH bands at 3,375 and 1,630 cm−1 in recrystallized CTABr are due to the adsorption of moisture from environment.
The moisture content in these samples may be attributed to the adsorption of moisture from the surrounding atmosphere after activation process, because almost all the moisture should be removed during the two-stage activation process at high temperature.
The adsorption isotherms of moisture vapor on the fiber surface have been analyzed and an assessment of changes in the nanomechanical properties of the fiber surface is provided.
The maximum adsorption is with sample-6 because it has the maximum concentration of CaCl2 which leads to adsorption of more moisture as compared to the other samples.
However, the structure is mainly hydrophilic leading to easy adsorption and adherence of moisture (water) molecules onto the surface41,48.
Under the operating conditions, the amount of moisture adsorption by the modified activated carbon increased by more than 18.8% of that of the original activated carbon sample.
Under operating conditions of this study, the amount of moisture adsorption by the modified adsorbent was increased by more than 23% of that of the commercial silica gel.
