The phrase "adopted values for" is correct and usable in written English.
You can use it when discussing principles, beliefs, or standards that have been accepted or embraced by an individual or organization.
Example: "The company has adopted values for sustainability and ethical practices in its operations."
Alternatives: "embraced principles for" or "accepted standards for".
A critical density value of 30 veh/km/lane has been assumed based on the generally adopted values for freeways under basic conditions [18].
The adopted values for the fiducial case (Model A) is shown in Table 2, while smaller and larger values for P1 are also examined (Models D and E, respectively).
Table 2 lists the adopted values for the power per capacity (P/C) in kW/Gb/s of the devices listed in Table 1 and depicted in Figure 1 and 2. All values are taken from [16] except the value for routers which we obtained from measurements at our local data center.
The values P comp.host _ local _ dc = P comp.host _ remote _ dc = 0.355 kW [16] and E LAN _ local _ dc = E LAN _ remote _ dc = 0.0017 kWh / GByte (derived from Equation 6 with the adopted values for network equipment) are constants for any decision policy, whereas the value for E network depends on the type of network and on the number of different hops, Equations 7 and 8.
While we have adopted values for kinetic parameters and concentrations in accord with experimental data whenever available (Tables 1 and 2), many of the true intracellular rate constants for the reactions in our simulations are unknown.
The measured value for (|theta _{epsilon _{2}}|) is compared to the adopted value for (theta ) used for the presented strength calculations, refer to Table 5.
Using the proposed method, we find that the adopted values of transit time for nine trans-Pacific services operated by Orient Overseas Container Line and five trans-Pacific services operated by Maersk Line are between US$5/TEU/day and US$30/TEU/day.
For the adopted value of the reference crustal density of 2670 kg m−3 (Hinze, 2003), the nominal ocean density contrast (at the zero depth) equals = 1642.09 kg m−3.
It was shown that the adopted value performs well for most scenarios except for cases where a very large number of replicate datasets are available [29].
In the above, we adopted different values for fgrow and fdisr between silicate and graphite.
All of these values fall within the range of those of North Pacific deep SW (Reid [2009]); therefore, we adopted these values for the chemical and isotopic compositions of SW in this study.
