We adopted the length of unrestricted gas migration (LUGM) as the main design criterion in this assessment.
The geometrical parameters of practical MWCNTs in our previous experiments [6, 7] were directly adopted with length of l = 5 μm and diameter of D = 50 nm.
Combining these observations and those from previous reports [ 22- 24], we adopted a length of 500 bp for the putative 5′-untranslated region (5′-UTR) and 500 bp for the 3′-UTR.
These newly added vectors are elongated toward the surface of a virtual sphere to adopt the length of the primary vectors of the octahedron running along the Cartesian axes (Figure 6c).
Since we obtained the ordered patterns when we adopted arc length instead of angle θ, these rules did not affect our conclusions.
In this paper, binary encoding is adopted, and the length of the chromosome is (c cdot n_{n}) bits.
In the pile group setup, pile spacing of eight diameter (8D) was adopted and the length of the piles was so selected as to maintain a length to diameter (L/D) ratio of 20 (Chandrasekaran and Boominadhan 2010).
To design the primers, we adopted a primer length of 20 bases, a moderate GC content (approximately 50%%), and usually less than three degenerated bases, and because the conserved regions among the variety of taxa were not extensive, there were limited options for selecting primer positions.
Increasing the adopted average tract length of 100 bp detects less putative recombination events by missing many of the smaller sequence inserts, while further decreasing this value does not change the results.
For C-V measurements, underlap gate structure was adopted (gate length L g of 3, 8, and 16 μm for channel length L of 4, 10, and 20 μm, respectively) to minimize the parasitic capacitance.
