The phrase "adopted configuration" is correct and usable in written English.
It can be used when referring to a configuration that has been accepted or implemented, often in technical or organizational contexts.
Example: "After thorough testing, the team decided to proceed with the adopted configuration for the new software system."
Alternatives: "accepted configuration" or "implemented configuration".
One widely adopted configuration retained the turret but replaced the human loader by an automatic loading mechanism.
In the adopted configuration the water, contaminated by nitrates, flows inside the fibres of a membrane unit.
The adopted configuration drives to the achievement of coatings without solidification cracking, one of the major defects that can occur during the solidification of metallic alloys.
This article reviews and compares test configurations used in past experimental studies and presents the adopted configuration for an experimental investigation on 13 full-scale internal slab-column connections without transverse reinforcement.
The simulation results show that the system (i.e. designed to meet the full power demand) with the adopted configuration can supply 95% of the annual hot water demand, with more than 90% of this demand met in winter compared to 54% met from the collectors of the solar-thermal (ST) only.
The developed model has been applied to significant cases of saw-tooth roofs facing the equator, obtaining some annual reference patterns for these factors and variables aiming to estimate the suitability of the adopted configuration and focussing strategies as means for obtaining a seasonal control of the solar gains on the roof apertures.
A reduction 28 96% in CO2.eq emissions of the systems is achieved by adopting configurations with "double collector surface/output".
The results show that large spin polarization of currents would be achieved when the junctions adopted the configuration that two ZGNR leads coupled each other along one edge.
Alternatively, joint ML detection (i.e., "brute force") is adopted in configuration A when estimating the two final remaining messages.
For practical purposes, and since it presented good results for throughput and area, we adopted the configuration based on 45 FUs as the basis solution to be optimized.
To circumvent this problem, in the present study, we adopted a configuration with a linear current path between the voltage terminals (Figure 1d).
