The phrase "adjustments can be achieved" is correct and usable in written English.
It can be used in contexts where you are discussing the possibility of making changes or modifications to something.
Example: "Through careful planning and execution, adjustments can be achieved to improve the overall efficiency of the project."
Alternatives: "modifications can be made" or "changes can be implemented."
Moreover, though one corner may have been turned, there is no telling when another major adjustment will come due, or how accommodation can be achieved without horrendous strain.
Simple adjustments to the decor can be achieved on a reasonable budget.
Thus, the real and reactive power adjustment of controllable devices can be achieved as: [Delta P] = [Delta V]/[ S_{P}^] (17) [Delta Q] = [Delta V]/[ S_{ Q}] (18)where ( [Delta V] ) is the deviation between the measured voltage and a lower or an upper limit, which is 0.97 p.u. for the under-voltage and 1.03 p.u. for the over-voltage cases respectively.
② If (mathrm{G}^{2}) smooth continuity is unchanged, then global shape adjustment of the splicing curves can be achieved by altering shape parameters and control points.
The analysis employs parameters such as the extension of the steam reforming reaction and the hydrogen utilization in the SOFC and proves that the appropriate adjustment of the plant performance can be achieved by simply interrelating them in order to control the energy losses to environment and the participation of combustion processes in the power cycle.
Homeostatic plasticity can be achieved through adjustments in the strength of synaptic inputs, neuronal excitability, neuronal connectivity, or the balance between excitation and inhibition.
The goal of this chart is to reach the square labeled "extubate" in the middle bottom part that can be achieved through adjustments in the ventilator settings according to the results of the blood gas analysis.
Favorable recoveries can be achieved via adjustment of the preinjection conditions of reservoirs.
Compensation of a machine tool's volumetric errors can be achieved by adjustment of the axes original commands.
The adjustment in the BESS output power can be achieved by increasing r g to reduce the BESS contribution to the frequency regulation.
