The phrase "adjustment of the machine" is correct and usable in written English.
It can be used when referring to the process of modifying or fine-tuning a machine to improve its performance or functionality.
Example: "The technician performed an adjustment of the machine to ensure it operated at optimal efficiency."
Alternatives: "modification of the machine" or "tuning of the machine."
To prevent conflict between signals, each running needs 0.2 s delay; the adjustment steps of the machine are related to the initial defocusing state of the system, which may also affect focusing time.
However, formula (9) is wrong when considering the spinning reserve capacity and the adjustment of the balancing machine in the power system.
With adjustments in electronics, the wrong responses could be suppressed, and Rosenblatt's claim was that after a finite number of adjustments the machine would learn to recognize patterns.
The results indicate the following: (1) the proposed optimization methodology effectively yields the maximum production rate and presents the optimal selection range and the optimal adjustment size of the reprocessing machine, and (2) the reprocessing accuracy affects the maximum production rate but has little effect on the optimal selection range and the optimal adjustment size.
He was also a leading exponent of ergonomics, an aspect of technology that applies biological and engineering data to problems related to the mutual adjustment of man and machine, seeking to ensure that the tools and machines man uses and the work he performs are in accordance with his physical characteristics.
This definition, which was originally intended to describe human-human cooperation, can be extended to Human-Machine Cooperation if adjustments are made to compensate for the limitations of the machine's capabilities.
Most bandsaws have a tension adjustment screw or knob on the upper, rear portion of the machine.
Quality data must of a form that allows appropriate adjustment of machine parameters (process parameters) to achieve the desired quality.
On some commercial machines, a manual adjustment of the viewing optics is possible.
