The phrase "adjusting the gain" is correct and usable in written English.
It can be used in contexts related to audio, electronics, or signal processing where one needs to modify the level of a signal.
Example: "The technician spent several hours adjusting the gain to ensure optimal sound quality during the concert."
Alternatives: "modifying the gain" or "tweaking the gain".
b Grey-scale ultrasound shows a cystic lesion which, on adjusting the gain, shows a fat/fluid level diagnostic of galactocele.
Simulations have previously shown that, for broadband excitation, adjusting the gain of a local velocity feedback loop to maximise their absorbed power also tends to minimise the kinetic energy of the structure under control.
A complete solution for COC by adjusting the gain of the antenna due to the electrical tilt and the downlink transmission power of the surrounding eNBs can be founded in [36], and this solution is based on reinforcement learning tools.
At a maximum refresh-rate of 4 MHz, the AGC is capable of adjusting the gain of the VGA within less than 250 ns when the input signal envelope is reduced by 20 dB, and 100 ns when raised by 20dBB.
On the other hand, excitatory modulatory input increases both excitation and inhibition locally, differentially adjusting the gain of neurons.
The detector gain for each channel was set by, using an embryo with the characteristic expression pattern, adjusting the gain until only several pixels were saturated.
Furthermore, the high frequency control spillover can be greatly eliminated by appropriately adjusting the gains of modal filters.
Moreover, the insertion losses from the input to the output of the resonator can be easily compensated by adjusting the gains of individual blocks inside the oscillator loop.
I just figured she needed to adjust the gain a little.
The short preamble is also used to adjust the gain of an (automatic gain control) AGC at the receiver input.
In recent years, the model based state estimators are welcomed widely, since they can adjust the gain according to the error between the model predictions and measurements timely.
