The phrase "adjusted solution" is correct and usable in written English.
It can be used when referring to a solution that has been modified or tailored to meet specific requirements or conditions.
Example: "After reviewing the initial proposal, we came up with an adjusted solution that better fits the client's needs."
Alternatives: "modified solution" or "tailored solution".
The pH of the experimental solution was adjusted, solution thoroughly mixed, and the measurements were repeated for several pH steps.
The clear supernatant layer was filtered to obtain protein free human serum sample and its volume was adjusted to 150 mL using double distilled water, then 15 mL of this adjusted solution was tested.
The slurry for tungsten CMP generally contains oxidizer, iron catalyst, complexing agents and stabilizers in a pH adjusted solution of abrasive particles.
250 μL of 800 mM 1-ethyl-3- 3-diethylaminopropyl) carbodiimide and 500 μL of 1-ethyl-3- 3-diethylaminopropylere 1-ethyl-3- 3-diethylaminopropylusted 1-ethyl-3- 3-diethylaminopropylnducted with stirring at room temperature for 2 h.
In the method, palladium oxide hydrate (PdO·H2O) nanoparticles (NPs) with high dispersion is obtained easily by adjusting solution pH in the presence of 1,4-butylenediphosphonic acid (H2O3P- CH2 4-PO3H2, BDPA).
The appropriate amount of humic acid was first dissolved into 60 mL of 0.05 M NaOH, followed by adjusting solution pH to 7.50 with 1.0 M HCl.
To analyze the interaction of aerobic granular sludge with BDE-209, experiments were carried out by adjusting solution pH, ionic strength, sludge dosage, initial BDE-209 concentration, and temperature in a batch mode for a period of 24 hours.
Because the mechanism of QD fluorescence sensing for Mn2+ is strongly pH dependent, where the sensing of Cu2+ is less pH sensitive, a recognizable detection of the two ions is possible by adjusting solution pH.
Stepwise addition of NaOH solution adjusted the precursors solution to pH = 9.
The solution (4 mL) of different pH values (neutral, PBS buffer solution 7.0; acidic, adjusted by HCl solution; alkaline, adjusted by NaOH solution) was carefully added into the cuvette to ensure that SiO2-IMI were completely immersed into the solution.
The pH of the solution was adjusted using ammonia solution dropwise to approximately 9.66.
