The phrase "adhesive pressure" is correct and usable in written English.
It can be used in contexts related to materials science, engineering, or adhesive applications, referring to the pressure applied to ensure adhesion between surfaces.
Example: "The adhesive pressure must be maintained for optimal bonding between the two materials."
Alternatives: "bonding pressure" or "tack pressure".
These two different geometries have been considered as exemplar cases which are of great relevance in a large number of applications of crucial importance as structural adhesives, pressure sensitive adhesives, coatings and protective adhesives.
Plackett Burman factorial design was first employed to eliminate some factors from selected seven important parameters: flake thickness, flake length, dried chips moisture content (MC%), amount of adhesive, pressing time, pressure, and press temperature.
L9 (33) orthogonal tests with three factors and three levels were adopted to study the effects of adhesive spread rate, pressure, and pressing time duration on the block shear strength (BSS), wood failure percentage (WFP), and rate of delamination (RD) of CLT via block shear tests and cyclic delamination tests.
Four metallic metamaterials with tailorable mechanical properties are designed using bi-material star-shaped re-entrant planar lattice structures, which do not involve pins, adhesive, welding or pressure-fit joints and can be fabricated through laser-based additive manufacturing.
Paretkar et al. presented a pressure actuated adhesive system, where adhesion can be switched by varying the compressive load.
The nature of the adhesives' function has placed pressure on the prices of adhesives.
On the basis of the experimental results, the following properties of the pressure actuated adhesive system in air and vacuum conditions were analyzed: the adhesive properties, the reversibility of switching, and the adaptability for pick and place processes.
Cold flow is a unique aspect of pressure sensitive adhesives that manifests itself through adhesive migration out of the edge of the patch during storage or when the patch is applied to the patient.
