The phrase "adhesive paste" is correct and usable in written English.
It can be used when referring to a type of paste that is designed to stick or bond materials together, often used in crafts, construction, or manufacturing.
Example: "For this project, you will need to apply a generous amount of adhesive paste to ensure a strong bond between the surfaces."
Alternatives: "glue paste" or "bonding paste".
But in this experiment, subjects enter the lab, and the first thing they do after getting settled is have electrodes placed around their heads with an adhesive paste, Dr. Goel said.
On this is fixed a coat of hempen cloth (or paper) by means of an adhesive paste of wheat or rice flour and lacquer, which needs at least 24 hours to dry.
A small amount of adhesive paste of Transbond XT was applied to the bracket bases.
The adhesive paste was applied to the base of the bracket, which was placed on the center of the tooth surface with firm pressure.
In the case of L concrete shown in Fig. 17a, the interface between the porous adhesive paste and the cement matrix is not well-defined, and it is expected that the area with the porous adhesive paste will become a penetration route for deterioration factors from the external environment.
The modification treatment of the surface of adhesive paste consist of a porous causes densification on the surface of recycled coarse aggregates, resulting in higher density and lower absorption ratio compared to low-quality recycled aggregates as shown in Sect.
Adhesive paste-on hangers.
It is worthy to note that the selection of an appropriate formulation for AMP-based topical products has a substantial impact on their efficacy (Trotti et al. 2004; Kollef et al. 2006; van Saene et al. 2007) as shown for the treatment of oral mucositis, in which a mucosal-adhesive paste is superior to a mouthwash (van Saene et al. 2007).
The adhesive resin paste was applied to the bracket base and the bracket seated on the surface of the laminate by the same clinician [5, 18].
A highly adhesive CNT paste was prepared with silicon carbide and nickel nanoparticles, and then the small CNT emitter was fabricated by a novel and facile technique, called point contact method.
Paste adhesive bonding was carried out by implementing the novel insertion squeeze flow process.
