The phrase "adhesive level" is correct and usable in written English.
It can be used in contexts related to measuring or describing the amount or strength of adhesive used in a particular application.
Example: "Before applying the wallpaper, make sure to check the adhesive level to ensure proper adhesion."
Alternatives: "adhesive strength" or "adhesive amount".
The objective of this research was to characterize the mechanical and water resistance properties of CWR particleboards bonded by four different adhesive levels and compositions, including 4% polymeric methane diphenyl diisocyanate (PMDI), 2.8% PMDI, [1.2% rice bran adhesive (RBA) + 2.8% PMDI] and [20% recycled high-density polyethylene (HDPE) + 2.8% PMDI].
This paper presents a method to increase the adhesion level of electrostatic adhesives by optimizing the electrode geometry and using a novel manufacturing technique.
Normal tapering increases the peel strain and has negligible influence on shear strain level in adhesive layer.
Strains are found to have maximum magnitude at the patch overlap edge and the shear strain level in adhesive layer is higher than the peel strain.
The hydrophilic property of Eremurus spp. indicates that dimensional stability also increased with decreased adhesive treatment level.
However, dimensional stability is affected by the adhesive treatment level when the wood particle size is smaller than that of the adhesive particle.
The samples acquired high internal bond strength values when the Rhizphora spp. particle size was reduced and the adhesive treatment level was increased.
These metrics were calculated for a large number of modeled patterns based on a Cellular Automata technique, employing four separate vegetation spread strategies at different adhesive growth levels.
Results further show that both the adhesive toughness levels and the critical porosity governing the onset of void coalescence are significantly lowered with increasing pressure-sensitivity.
