The phrase "adhesive friction" is correct and usable in written English.
It can be used in contexts related to physics, engineering, or materials science, particularly when discussing the forces that cause two surfaces to stick together.
Example: "The adhesive friction between the two surfaces was strong enough to prevent any slippage during the test."
Alternatives: "stickiness" or "tackiness".
Traction is a word originally meaning "the action of pulling" that came to mean "the adhesive friction of a vehicle on the ground" and has been extended further in politics to "the grip of a campaign on the public attention".
The coefficient of friction followed the model for adhesive friction.
For adhesive friction, the transformation from elastic deformation to plastic deformation is the main mechanism.
Secondly, vacuumization could lead to cavitation, which cause desorption of lubricant and expose naked surface further increasing adhesive friction.
Wear tests of the gradient coating reveal good adhesive friction and wear properties when sliding against steel under dry conditions.
The presence of debris on the sample confirms that adhesive friction conditions are realized in the experiment and actual wear process takes place.
Two thin layers of water-resistant breathable plastic (with no gel) backed by adhesive deflect friction by gliding against each other.
In simulation 3, the plate is designed by checking the soil properties such as the N value, adhesive power, friction angle, and weight of unit volume that are input manually by the user as shown in Figure 12.
Results of adhesive wear, friction and interface temperature of glass fibre reinforced polyester composite under wet/dry contact condition are reported at 50 N load for different sliding speeds (2.8 7.8 m/s) using the new machine.
In this work, the influence of substrate bias voltage on the microhardness, adhesive strength, friction coefficient, and wear rate of AIP Cr2O3 films deposited on AISI 304 stainless steel substrates was investigated systematically.
The proposed theory can give important insight into the true nature of processes leading to adhesive contact of friction surfaces in boundary lubrication conditions.
