The phrase "adhesion issues" is correct and usable in written English.
It can be used in contexts related to problems with sticking or bonding, often in technical or scientific discussions.
Example: "The manufacturer reported several adhesion issues with the new adhesive formula during testing."
Alternatives: "bonding problems" or "sticking challenges".
While some flexible MSCs have been demonstrated using laser writing12,13, inkjet printing14,15,16, or screen printing17, these approaches have rarely been adopted in stretchable MSCs because the electrode materials used cannot accommodate large strain due to their stiff mechanical properties and interfacial adhesion issues or mechanical incompatibility with the elastomeric substrates.
Spalling or other adhesion issues did not occur.
Several papers in the literature have addressed the roughness and adhesion issues of nanowire electrodes.
Choosing between these two options will be strongly influenced by the acceptable complexity of the conversion as well as cost, space, and adhesion issues.
On the London Underground Central Line, the core section is almost entirely underground, and the majority of the adhesion issues are encountered at the outer ends of the line where service density is typically lower.
In summary, although metal piezoresistors depict appreciable value of G/E ratio, they suffer from limitations such as Joule heating-induced inaccuracies, instability of resistance value due to electro-migration, and adhesion issues with SU-8 polymer.
When reclaimed asphalt (RA) aggregate is used in the production of CBEM, the adhesion issue becomes more complex because the residual bitumen interacts with the aged bitumen film coating the RA aggregate surface.
Adhesion issue of metal with polymer is another issue that can lead to device failure.
Insufficient PTFE binder could cause adhesion issue of the active materials on the electrode, and the specific capacitance and especially the capacitance retention over long cycles could also be adversely affected.
There are several coating techniques such as doctor blade coating, bar coating, drop cast, etc. PVDF content has to be precisely controlled since insufficient PVDF content does not provide enough binding strength between the active graphene and the current collector and can lead to an adhesion issue.
To address the adhesion issue, we introduce a thin gold layer between the template and the deposited materials.
