The phrase "adhesion failure" is correct and usable in written English.
It is typically used in contexts related to materials science, engineering, or adhesive bonding to describe a situation where an adhesive does not bond properly to a surface.
Example: "The test results indicated an adhesion failure, leading to the separation of the bonded materials."
Alternatives: "bonding failure" or "adhesive failure".
Under the tensile and four combined loading conditions, the failure mode was the combination of fiber breaking (or FRP delamination) and interfacial adhesion failure between FRP sandwich deck and adhesive layer.
This paper aims to present an experimental method for investigating an adhesion failure of the interface between concrete and adhesive mortar in an external wall tile structure under a thermal load.
The prevalent mode of fracture of samples is adhesion failure, which is the fracture between the adhesive and the coating.
The adhesion properties obtained by using a polyurethane adhesive (PU) showed improved T-peel strength values and an adhesion failure in the joints produced with EVA20 treated with oxidizing plasmas, and lower T-peel strength values with those of non-oxidizing plasmas.
No cohesion failure and adhesion failure were observed.
The adhesion failure among aggregates occurred in the internal sol slurry of the asphalt mineral powder.
Many adhesion failures are caused by exceeding of the open time.
Local adhesion failures caused non-uniformity in the potential profile measured by SKP.
During testing of sample aluminum panels, one batch was processed without the oxygen plasma treatment and exhibited extensive adhesion failures.
Adhesion failures of WMA prepared with polymer modified binder were lower than mixtures prepared with unmodified binder.
The evaluation and detection of adhesion failures on the interface between the layers of these materials have great importance for these applications.
