The modified STN provides many advantages including stable cycleability, low charge transfer resistance, strong adhesion between active materials and active material and current collector, etc. Electrochemical performances are significantly improved after modification; especially under high current density conditions.
In building construction, because of the hygroscopic nature of wood and earth brick and the low adhesion between these materials, cracks are formed at their interface when they are assembled.
Additionally, we observed that at room temperature the contact resistances of the vacuum-filled microchannel structures were 50% lower than those of the direct-write structures, likely due to the poor adhesion between the materials observed during the direct-writing process.
Our findings not only are important for understanding the role of elastic matrices in cell adhesion, but also have general implications on adhesion between soft materials.
The present study indicates that the effect of elasticity in controlling bond rebinding is intrinsic in molecular adhesion between soft materials.
Successful adhesion between dental materials is related to the chemical composition of their surfaces [ 35, 40].
To measure the bond strength, which was the measure of durability of adhesion between the materials regardless of the location of the failure, the bonded specimen was mounted in a jig attached to a 500-N load cell in the testing machine.
The mechanical rolling (preprocessing) disrupted the adhesion between non-cellulosic materials and cellulose, resulting in direct fall-off of abundant non-cellulosic materials, intensifying the infiltration capacity of microorganism and its enzymes.
SEM and TEM images showed the excellent interfacial adhesion between these two materials and segregated conductive structure was well-established.
Interfacial adhesion between the two materials was achieved by adding a compatibilizer, maleic anhydride grafted polypropylene, PP-g-MA.
Then, a different numerical model, based on a non-linear constitutive model for concrete and perfect adhesion between all the materials, was adopted.
