The phrase "adequate bonding" is correct and usable in written English.
It can be used in contexts discussing relationships, materials, or connections that are sufficient or satisfactory.
Example: "The project requires adequate bonding between the components to ensure durability and performance."
Alternatives: "sufficient bonding" or "proper bonding".
Tack coats are bituminous materials applied between pavement lifts to provide adequate bonding between the two surfaces.
The results of this study demonstrate that bamboo-composite reinforcement without coating develops adequate bonding with the concrete matrix.
During these investigations, the aim was to absorb as much contamination as possible in the adhesive to achieve an adequate bonding performance.
The "Coating Ratio" parameter is proposed as an index to evaluate the coating quality of CMA, and as a means to ensure adequate bonding between asphalt and aggregate.
It is composed of various mechanically stable (therefore, suitable for load bearing applications) biomaterials and/or bio-devices with calcium orthophosphate coatings, films and layers on their surfaces to both improve interactions with the surrounding tissues and provide an adequate bonding to bones.
We obtained an adequate bonding strength of 95.2 MPa, which was three times larger than the required design strength (30 MPa) under the conditions of a temperature of 535 °C, pressure of 100 MPa and a holding time of 1 h.
Development of dental adhesives that can effectively adhere to contaminated dentinal surfaces and provide adequate bond strength is of great interest and could improve dramatically the bonding quality of dental adhesives reducing failure of dental restorations.
In other cases, the giving of an adequate bond "shall prevent the precautionary attachment or give a right to immediate release".
One of the most important prerequisites of reinforced concrete construction is adequate bond between the reinforcement and the concrete.
The success of the strengthening intervention largely depends on adequate bond between FRP sheets and the concrete substrate.
It is necessary to obtain an adequate bond at the core/dentin junction where the majority of failures occur.
