The phrase "additional rod" is correct and usable in written English.
It can be used when referring to an extra rod that is being added to a set or collection, often in contexts like fishing, construction, or equipment.
Example: "The kit comes with an additional rod for enhanced stability during use."
Alternatives: "extra rod" or "supplementary rod".
However, the detection by cryo-EM of 12 additional rod-like bodies within the toroid raises the possibility that the architecture of the toroid is more complex than previously thought or that yet unknown ligands or allosteric effectors for this oxygen carrier are present.
By changing the radius of the additional rods, the transmission coefficient of the Y-junction can be optimized.
The Y-junction is designed by moving the corner rods of Y-junction into a resonant cavity and placing additional rods between the resonant cavity and the output waveguides.
(A2 ) Graphs summarizing the effect of the light background on this and two additional rods.
A seed rod was placed at the center of the simulation, and additional rods were released and allowed to move randomly until either they contacted the aggregate or they moved too far away from the aggregate and were discarded.
(Fig. 2) Three rods connect the horseshoe-shaped ring and tibial assembly; an additional anterior rod is used between the transverse link across the straight plates and tibial assembly to complete a circumferential connection between tibia and foot.
The results indicate that an additional safety rod with boron carbide as absorber material can be used to enhance the safety of MNSRs.
The Monte Carlo Neutron Particle code; version 5, (MCNP5) was used to design the additional safety rod at one of the inner irradiation sites with cadmium as absorber material and stainless steel as clad.
This work presents an investigative study into the design of an additional safety rod, which will be an important safety component in the MNSR and will provide another alternative way to emergently shut down the reactor.
Make additional truss rod adjustments with no more that a 1/8-turn at a time, retuning and remeasuring after each adjustment.
