Sentence examples for additional power output from inspiring English sources

Therefore, the expander of the oxy-combustion cycle and the gas turbine provides additional power output.

In this context, the hybrid single-flash power plant is able to produce at least 20% additional power output, depending on the characteristics of the geothermal resource.

The study deals with the utilization of organic Rankine cycle (ORC) to recover waste heat from compression ignition (CI) engines and produce additional power output.

The optimum simple dual-loop ORC with n-pentane and R125 as working fluids produces an additional power output of 729.1 kW, which is 4.15% of the original engine output.

In conclusion, results show that, the recommended cycle increased overall efficiency improvement from 2.8% for the conventional system to 5.1%, with an additional power output of 1210 kW, representing 9.7% of the engine's power.

The current work considers the possible benefits of using the exhaust gases in a HRSG in order to produce steam which drives a steam turbine for additional power output.

The minimum and maximum energy storage capacity limits Q min and Q max can be converted into the additional equivalent power output constraints within k th time interval.

The results showed that the net power plant efficiency gain is as much as 0.4 percentage point with additional net power output of 9.3 MW as compared to the reference plant without coal pre-drying.

Results showed that, for a typical 1000 MW CFPP in China, using the proposed boiler cold-end design for waste heat recovery could produce 13.3 MWe additional net power output with a heat rate reduction of approximately 112.0 kJ/kW h and could yield a net benefit of up to $85.8 M per year, which is much greater than those of the conventional cases.

In order to compensate for the loss of output caused by seasonal changes in ambient temperature, supplementary firing in the heat recovery steam generator can be used to generate additional power and return the power output to 640 MW at 45 °C, at the expense of an increase in fuel costs and a drop in efficiency from 50.95% to 43.46%, without and with supplementary firing respectively.

In the case where a 2-stage TC system is installed for additional fuel savings, the power output of the engine can be raised and 4 cylinders less are needed, thus the engines are 2*12V46F + 2*6L46F.