Sentence examples for additional increases of the from inspiring English sources

The additional increases of the H-component at equator are explained by the electric fields of the FAC from Region 1 that can directly penetrate (without regard to the magnetospheric ring current) to the middle-latitude and then to equatorial ionosphere during IMF Bz<0.

The subsequent annealing of the irradiated sample resulted in an additional increase of the relaxation constant to 2.1 s and a slight loss of crystallinity.

Taking into account the additional increase of the traffic load brought to the MBS, a key design principle of the proposed algorithms is to switch off the SBSs gradually based on their locations, user densities in their coverage areas or the highest power that can be saved by switching some of them off, respectively.

Azide-modified PET fibres give rise to an additional increase of the global rate of the PP crystallization process, but in this case the transcrystalline development of the PP is not so sensible as in the presence of the unmodified fibres.

The oscillations of the jet radius lead to additional increase of the Lorentz factor during the expansion phase and its decrease upon contraction.

At the edges of the crystal, an additional increase of the bias was visible, in agreement with what has already been observed in monolithic scintillator with single side readout by other groups (see e.g. [41]).

The addition of ZnO-NPs or Cu-NPs caused an additional increase of the chromatic changes both for Silo111 and Estel1100, which seems to diminuish or to be constant with time.

This is in accordance with the properties derived in Proposition 4. After this value, the obtained results both for the simulated robot and the physical one show that an additional increase of the amplitude (alpha) causes a decrease of the forward velocity.

The source channel phase asynchrony in the system with direct links further degrades the performance on the sources → relay channel and thus an additional increase of the source transmission power (and consequently γ MAC) is required to provide a zero-error rate.

Fig. 17 Robustness analysis for two fixed (N b,N s,r b,r s ) scenarios The source channel phase asynchrony in the system with direct links further degrades the performance on the sources → relay channel and thus an additional increase of the source transmission power (and consequently γ MAC) is required to provide a zero-error rate.

Beyond this point, the "sharpen" filter results in additional increase of the MTF of the raw data, giving better resolution in this frequency range.