The phrase "actuated with a" is correct and usable in written English.
It can be used in contexts where you are describing something that has been activated or set in motion by a particular force or mechanism.
Example: "The machine was actuated with a simple push of a button, allowing it to start its operation."
Alternatives: "triggered by a" or "activated with a".
"The foot is actuated with a linear actuator driven by a Pololu Dual VNH5019 Motor Driver Shield," the artist continues.
Experimental validation of the equations is accomplished by examining the static and dynamic response of a cantilevered beam actuated with a distributed electrostrictive actuator.
We present a design for a miniature self-priming peristaltic pump actuated with a single linear actuator, and which can be manufactured using conventional materials and methods.
The actuator generated peak pressures and deflections of 123 kPa and 167 μm when actuated with a 14.3 mJ heating pulse for a thermal efficiency of 0.15%.
Like many truck-based S.U.V.'s, four-wheel-drive models have a part-time transfer case, manually actuated with a dashboard knob, unless the buyer opts for the automatic torque-on-demand system.
Each assembly is actuated with a DC motor.
In particular, when the graphene resonator is actuated with an actuation amplitude of 5 fN, the parameter θ becomes θ = 0.75, indicating that the resonance behavior is highly nonlinear.
The nonlinear vibration of a graphene resonator actuated with an actuation amplitude p0 even in the order of 1 fN is attributed to the fact that the deflection amplitude of a graphene resonator is typically much larger than the thickness of a graphene resonator.
The machine has 22 degrees of freedom each actuated with an electric motor, and is made up of modular components, which means the robot can be easily rebuilt to suit the application, says its designer.
Phase averaged wall shear stress measurements far downstream of actuation indicate that quasi-steady structures are introduced by the vortex generators when actuating with a sufficiently high pulse frequency.
In order to be able to design an effective control of 2-link soft robot arm actuated with PAMs, a dynamic model of this system needs to be derived.
