The phrase "actuated using a" is correct and usable in written English.
It can be used in contexts where you are describing how something is activated or set in motion, typically in technical or mechanical discussions.
Example: "The robotic arm is actuated using a hydraulic system to ensure precise movements."
Alternatives: "activated by a" or "triggered with a".
This paper presents an innovative valving and inward pumping technology for elastic polymer based centrifugal microfluidic platform actuated using a specially designed flyball governor.
The test setup was conducted using a home-made fully automated stretching apparatus that was composed of a linear stage actuated using a micrometer screw that was driven by a stepper motor with a step resolution of 10 μm.
The first configuration is actuated using a piezoelectric stack embedded under the sensor base yielding a base-type actuation while the second is actuated via a piezoelectric ZnO layer deposited on the surface of the sensor.
We present control synthesis for attitude synchronization of a cluster of satellites, that are internally actuated, using a coordinate-free approach.
Microrobots can be actuated using various actuation methods including magnetic actuation [8, 9, 16 20], bacterial propulsion [3, 4], biomimetic propulsion [21, 22], and opto-thermal actuation [7, 12, 13, 15].
Fig. 3 An OFB microrobot was actuated using open-loop control from waypoint 1 to 2 (a, b), waypoint 2′ to 3 (c, d), waypoint 4′ to 5 (g, h), and waypoint 5′ to 6 (i, j), at velocities of 70, 43, 44, 46, and 39 μm/s, respectively.
The device is actuated using water currents and the output voltage is fed through a voltage rectifier to convert it to the required DC input of the sensors.
The joints were actuated using four-phase hybrid stepper motors.
Upward and downward steps are made by a specific sequence of moving, opening and closing two internal clamps which are actuated using three subsystems.
In addition, the microdevice is pneumatically actuated using air, preventing damages in the extracted volumes because of electric fields and minimizing the actuation cost because inert gas sources are not necessary.
Valves and blades were actuated using custom LabView software.
