The phrase "acrylic adhesive" is correct and usable in written English.
It can be used when referring to a type of adhesive made from acrylic materials, commonly used in various applications such as crafts, construction, and manufacturing.
Example: "For this project, I recommend using an acrylic adhesive to ensure a strong bond between the materials."
Alternatives: "acrylic glue" or "acrylic bonding agent".
Polydimethylsiloxane (PDMS) film was treated with RF low-pressure plasmas (LPPs) made of mixtures of oxygen and argon for increasing surface polarity, minimizing hydrophobic recovery (i.e. retard ageing) and increasing adhesion to acrylic adhesive tape for medical use.
Acrylic resins were formulated with various tackifiers solution including hydrogenated sorbic acid grafted dicyclopentadiene tackifier in acrylic adhesive and rolling ball tack, loop tack, 180° peel adhesion strength, and shear adhesion strength were measured.
According to our experimental results using CF/EP specimens, a possible candidate is a primer (e.g., epoxy-like) that has good adhesion properties for both aluminum alloy and acrylic adhesive.
To demonstrate the potential of this approach, adhesively-bonded double-lap timber joints were manufactured using a ductile acrylic adhesive and then subjected to axial tension and compression loading.
McKinlay said there was no hurry to patch the crack on the hoof with acrylic adhesive and some fiberglass mesh.
The ductility and time-dependent recovery of a ductile acrylic adhesive were investigated in this work.
In this research, solubility modulators to increase solubility of MX and acrylic adhesives and skin permeation enhancers were investigated through solubility tests, in vitro skin permeation tests, and stability tests.
A 27 year long ageing research project conducted into PVAc and acrylic adhesives by Down [42] at the Canadian Conservation Institute (CCI), initially found UHU All Purpose (composed of PVAc and CN) to be relatively stable.
With increasing monosaccharide acrylate concentration in the acrylic PSAs, adhesive performances such as the peel strength, cohesion strength, and probe tack were increased.
This last study was performed with high-strength low-alloy structural steel plates and an acrylic structural adhesive for metal bonding.
It is composed of polymethylmetacrylate (PMMA) as substrate, aluminum (Al) as conductive material and a light cure acrylic biocompatible adhesive to perform the bonding between the aluminum and the substrate.
