The phrase "achieves a stable state" is correct and usable in written English.
It can be used in contexts related to systems, processes, or conditions that reach a point of equilibrium or consistency.
Example: "After several iterations, the algorithm achieves a stable state, ensuring reliable results."
Alternatives: "reaches equilibrium" or "attains a steady condition."
After obtaining the dynamic equation, the original inputs can drive the network till it achieves a stable state.
Because a black hole eventually achieves a stable state with only three parameters, there is no way to avoid losing information about the initial conditions: the gravitational and electric fields of a black hole give very little information about what went in.
This is a process similar to simulated annealing where the material achieves a stable state by slowly decreasing the temperature.
The IP potential curve, after spontaneous potential compensation, is shown in Fig. 1, where I 0 is the supplied current, (V_{text{p}}^) is the potential when the IP potential excited by positive current achieves a stable state, (V_{text{t}}^ (t)) is the IP decay potential after the positive current is switched off.
Since the reboot and recovery operations are performed as part of the critical execution sequence, they take more time to achieve a stable state by recovering failed node.
For the solids with high XPb or low XCa [(Pb0.89Ca0.11 5(PO4)3OH], the aqueous Pb/(Pb + Ca) molar ratios (XPb,aq) decreased gradually from 0.90 to 0.02 with the increasing time and achieved a stable state after 5040 h dissolution.
For the solids with high XPb or low XCa [(Pb0.89Ca0.11 5(PO4)3OH], the aqueous Ca2+ concentrations increased gradually with the dissolution time and achieved a stable state after 4320 h dissolution.
For the solids with low XPb (0.00 0.80), the aqueous Pb/(Pb + Ca) molar ratios (XPb,aq) decreased rapidly from 0.00 0.79 to 0.00 0.004 after 72 h dissolution and then achieved a stable state.
The short duration light exposures may not optimally allow the photopigment system to achieve a stable state of photoequilibrium, perhaps related to the long latency photic response of melanopsin.
A minimum of 5 weeks after buprenorphine induction, when assumed to have achieved a stable state, patients were requested to complete the NEO-PI-R at the clinics.
The time to achieve a stable state (particularly with respect to effluent PO2 concentrations) or load rhod-2, and then acquire baseline data and perform 1 intervention is 60 90 minutes, beyond which the preparation is not stable and so more than 1 intervention per mouse heart was not undertaken.
