The phrase "achieves a maximum of" is correct and usable in written English.
It can be used when discussing the highest level or extent of something, such as performance, capacity, or results.
Example: "The new engine design achieves a maximum of 300 horsepower, making it one of the most powerful in its class."
Alternatives: "reaches a peak of" or "attains a maximum of".
Under the experimental conditions of CH4/CO2 rate at 4/6, input power at 69.85 W and total feed flux at 2200 mL/min, the conversion ability achieves a maximum of 12.21 mmol/kJ with the conversion of CH4 and CO2 is 60.97% and 49.91%, the selectivity of H2 and CO is 89.30% and 72.58%, H2/CO rate is 1.5, respectively.
These policies result in an allocation of resources in LRRM where, in the OAI emulation environment, VNO BE1 achieves a maximum of 4.84 Mbps (89.8% of the network capacity), while VNO BE2 only 0.55 Mbps.
Regarding complexity, the proposed algorithm achieves a maximum of 73.7% running-time reduction with respect to HM6.0 with an average of 44.7% under "Random Access, main" configuration, as shown in Tables 3 and 4. In Table 3, the column of "ΔT" is the average ΔT of 4 QP points.
Deep neural networks have been trained to detect flaws in welds from radiographic scans33 in an automated process presented by Hou et. al. that achieved a maximum of 91.84% classification accuracy.
The proposed scheme is more efficient than previous approaches, the reduction in number of operations achieving a maximum of 17% in relation to other methods.
Cumulatively, these optimization strategies achieved a maximum of 16%and13%3% savings on life cycle carbon and energy, respectively, compared to the original design.
Under these conditions, the aqueous UAE would achieve a maximum of 32.31 mg GA/100 g fw for total phenolics and 2.04 mg quercetin/100 g fw for total flavonols.
The discharge capacity of the battery pack increases with increasing coolant temperature and is found to achieve a maximum of 19.11 Ah at a 1C discharge rate with the coolant at 40 °C.
Considering this, we achieved a maximum of 97% accuracy which encourages the application of SVMs in HU unit prediction using well log data for the un-cored sections of well or for the wells which do not have core data.
Especially, photocurrent achieved a maximum of 1.853 μA/cm2 after five voltammetry cycles of all samples.
Especially, photocurrent achieved a maximum of 1.853 μA/cm2 after five voltammetry cycles.
