Sentence examples for achieved with the material from inspiring English sources

The greatest decrease in oxygen concentration of the head space of air-tight chambers was achieved with the material extruded with PLA on at least one side.

The trials should be planned in such a way that they provide data on the relationships between material flow rate, air flow rate and conveying line pressure drop over as wide a range of conveying conditions as can be achieved with the material.

Effective catalytic degradation of 2-nitrophenol (80% conversion) was achieved with the material treated under air atmosphere at 300 °C, even when operating under a high pollutant/catalyst mass ratio, opening a window of opportunity for added-value crude glycerol-derived products.

Higher activity and immobilization selectivity was achieved with the microporous material that had higher carbon content.

The good electrocatalytic activity achieved with this material makes it useful for the quantification of AA and UA in biological fluids.

Greater success was achieved with the measurement of hammer milled material, held in the steel material pocket.

Previous test results have shown that near 6% reduction of total annual building energy consumption could be achieved with the substitution of the polymer material on flat roofs, compared with the reduction by 3% on walls, and the reduction by 2% on floors.

One possible alternative for tuning the emission wavelength (possibly closer to the one of the transparent optical transmission windows used in telecommunications) can be achieved with the help of dilute nitride materials.

Negative dispersion ranging from −183 to −281 ps/(nm km) in S + C bands is achieved with the refractive index differences between matrical material and cylindrical inclusions no more than 0.03.

It was found that a layer of CeO2 nano-flowers had been attached over the surfaces of ZrO2-SiO2 porous ceramics substrate, using the optimized concentration of CeNO3 precursor, and after the grafting of PFDTES, the super hydrophobicity of the obtained material was achieved, with the water contact angle being as high as 162° and sliding angle being approximately 0°.

The highest silylation reaction efficiencies were achieved with the aminosilane in all the oxidised materials and with mercaptosilane in the acid oxidised MWCNTs with nearly 4% Si insertion, whereas for the other organosilanes values lower than 2% were observed.