The phrase "achieved with a low" is not complete and lacks context, making it difficult to determine its correctness in written English.
It could be used in contexts discussing outcomes or results that are accomplished with minimal resources or effort, but it needs additional information to clarify its meaning.
Example: "The project was achieved with a low budget, allowing us to allocate funds to other areas."
Alternatives: "accomplished with minimal" or "attained with a low".
Both fair access and high aggregate network throughput can be achieved with a low complexity distributed access protocol by properly handling node access through all WDM channels.
At a speed of 60 rpm, a shelling effectiveness of 67% was achieved, with a low kernel-breakage factor of 0.090 and a throughput of 6.82 kg/h.
Consequently, excellent HER performance has been achieved with a low onset overpotential of 100 mV and a small Tafel slope of 45 mV dec−1.
The simulated results demonstrate that arbitrary splitting ratio and low optical loss for both TE and TM mode can be easily achieved, with a low dependence of wavelength and polarization.
After the optimization of laser processing conditions, the micro-hardness enhanced to 511.6 HV0.2 and a low friction coefficient of 0.30 was achieved with a low wear rate of 3.1 × 10−5 mm3/(Nm).
With the assist of target-catalyzed hairpin assembly and PdNPs@Fe-MOFs mimetic co-reaction for signal amplification, a wide detection range from 0.01 fM to 10 pM was achieved with a low detection limit of 0.003 fM (S/N =3).
The high flocculation rate (84%) was also achieved with a low-cost medium (the solid residue of tofu production from food industry).
Simulations show that the target rates are achieved with a low-complexity procedure, even in the case of populated networks and stringent QoS requirements.
A 75% cost reduction was achieved with a low-volume modified protocol which was tested over genomes with different GC content to demonstrate its robustness.
The low friction achieved with a-C H Si O F coa-C H Si O Fe to the coatingtion of passivation and hydration mechanisms that operated during sliding.
Mesoporous silica films with a specific surface area up to 314 m2 g−1 have been achieved with a very low level of microporosity.
