The phrase "achieved at the initial" is not correct and lacks clarity in written English.
It may be intended to refer to something that was accomplished at the beginning of a process or project, but it needs additional context to be fully understood.
Example: "The goals we achieved at the initial phase of the project set a strong foundation for our future work."
Alternatives: "accomplished at the outset" or "attained in the early stages".
A maximum power of 12.8 W (512 mW cm−2) is achieved at 600 °C.In the initial operation stage around 50 h, the cell's performance decreases from 12.8 to 11.2 W; however, after this point, the performance was consistently stable, and no significant degradation is observed in the current density or the cell performance.
The results of optimization showed that maximum MNZ removal efficiency was achieved at the optimum conditions: initial pH 7, current density15 mA/cm2, reaction time 100 min and electrolyte concentration 0.5 g/L.
Optimization results showed that maximum decolorization efficiency was achieved at the optimum conditions: initial dye concentration 10 mg/L, UV light intensity 47.2 W/m2, flow rate 100 mL/min and reaction time 200 min.
Optimization results showed that maximum decolorization efficiency was achieved at the optimum conditions: initial dye concentration 10 mg/L, UV light intensity 47.2 W/m2, flow rate 100 mL/min and reaction time 120 min.
Maximum COD removal (98%) was achieved at the optimum conditions (initial COD concentration of 200 mg/L, Hydrogen peroxide concentration of 8.8 mM, pH of 6 and reaction time of 120 min).
Maximum COD removal (98%%) was achieved at the optimum conditions (initial COD concentration of 300 mg/l, hydrogen peroxide concentration of 8.8 mM, pH of 5 and reaction time of 120 min).
During the 19-36 month sustainability period, the quarterly bloodstream infection rate did not significantly change from the rate achieved at the end of the initial evaluation period (1% decrease, 95% confidence interval 9% decrease to 7% increase).
The results of optimization predicted by the model showed that maximum decolorization efficiency was achieved at the optimum condition of the initial pH 8, initial dye concentration 10 mg/l, algae amount 4 g and reaction time 75 min.
