Sentence examples for achieve a surface from inspiring English sources

Also, it was established that the application of burnishing makes it possible to achieve a surface roughness of Sa < 0.4 μm as well as good values of many other surface stereometric structure parameters, so this machining process can be used for finishing AZ91 alloy objects.

Each specimen was then glazed to achieve a surface smoothness used as a control.

We balanced the ligaments and resected approximately 10 mm of tibial bone to achieve a surface that was perpendicular to the shaft of the tibia in the coronal plane with 7° posterior slope in the sagittal plane.

Far from equilibrium conditions for dissolution were established in all the experiments in order to achieve a surface-reaction controlled mechanism.

This Nautilus, propelled by two 50-horsepower electric motors operated from a 100-cell storage battery, achieved a surface speed of six knots (nautical miles per hour; one knot equals 1.15 statute miles per hour or 1.85 kilometres per hour).

In 2008, a 2.2 m × 2.2 m planar membrane antenna was developed and achieved a surface flatness of 0.17 mm.

In 2002, Pellegrino [29] from the University of Cambridge, developed an elastic ribs driven membrane antenna with a diameter of 1.5 m, which achieved a surface accuracy of 2.0 mm RMS, as shown in Figure 4.

In particular, spin-on benzocyclobutene (BCB) layers are demonstrated to give a versatile means of achieving a surface that is smooth enough for calorimetry of nanometer-thin films while simultaneously allowing the investigation of nanometer scale morphological features by means of SPM.

Triton generated 45000 hp on sea trials, reaching her design surface speed of 27 kn, and achieved a surface speed well in excess of 30 kn. Triton subsequently executed a four-hour, full-power submerged run and a crash-back maneuver.

Under these conditions, we also achieved a surface roughness of 0.58 nm RMS (see Figure S4d).

Therefore, this process not only can cast thinner layers to improve the staircase effect but also achieve a better surface by preventing surface pitting induced by laser ablation.