Sentence examples for achieve a scan from inspiring English sources

Preliminary results show the s-DBT system can achieve a scan time comparable with the regular two-view mammography, and improve the spatial resolution comparing with rotating gantry DBT.

We have developed a 1-D MEMS resonant scanner (Fig. 2) for X-axis scanning using a working principle based on electro-static, parametric resonant tilting [ 18] to achieve a scan angle greater than the desired ±6 degrees with a low drive voltage (<40 V) in a small 3 × 2 mm footprint.

To achieve a scanning rate of 500,000 A-lines per second, we adopted the imaging-speed boosting methodology proposed in [ 43], in which the two cameras were precisely and sequentially controlled.

A twofold state skip (TFSS) logic is developed to achieve a low scan power by skipping long scan chains to reduce switching activities.

Finally we combine the multi-slice approach with a compressive sampling reconstruction to sufficiently undersample q-space to achieve a DSI scan in less than 5min.

The MEMS 3D scan engine achieved a lateral scan range of over ±26° with a 2D MEMS scanning micromirror and a depth scan of over 400 μm with a 1D MEMS tunable microlens.

Therefore, to achieve an extended scan depth and sufficient resolution for the whole ocular anterior segment, some special techniques, including complex conjugate image removal [ 2, 10, 11], dual-channel dual-focus [ 12, 13], and optical switching, have been proposed [ 14, 16].

In addition to its low cost, another key advantage of the piezo disk actuator is that only moderate voltages (±40-50V ±40-50Vquired to areieve a sufficiently larequired range for useful imaging.

This scan angle is more than 1.7 times larger than that of the scanner with PZT actuators, and is high enough to achieve a clinically useful scan area of 1 mm × 0.7 mm at 3 mm working distance in a side-imaging probe.

Because a wide-field focus is necessary for SSTF to achieve a large axial scan range, the two-photon response is significantly smaller for a given excitation pulse than that for a conventional point focus.

Additional markers can be added to this MALD map by utilization of the rapidly growing single-nucleotide polymorphism databasingle-nucleotide polymorphismieve a 3–10-cM scanning scale.